|
Head Spacer Kit, stud kit, 3.5"HFM, wiring,
E-PROM, adaptor
AA Tuning Stage 2 Turbo Kits
Performance - Stage 2
Power: 430 bhp @ 6850 rpm
Torque: 425 ft/lbs @4100 rpm
0-60mph: 4.2 sec
Top Speed: 170+ mph
1/4 mile: 12.2 sec
Turbo Boost: 11psi |
|
AATuning OBD-I Stage 2 Gen3 Turbo Kits
92-95 325i
1995 M3Super Car Performance without the Super Car cost!
Install an Active
Autowerke Generation 3 Stage 2 Turbo System and feel the meaning of
power! Get 400+ horsepower on a 95' M3 with the AA Stage 2 turbo
kit, and you'll be upgraded into "Supercar" status, while still
maintaining the civility of a daily driven car. The AA turbo system
is SMOOTH and EFFORTLESS.
Generation 3 Stage 2 will
give you the feeling of what is FAST and FURIOUS!
With 400+ horsepower, there is a power increase that almost doubles
the stock 240 BHP.
Active Autowerke Turbo M3's
were featured on the cover of European Car magazine. The US
spec cars with 240bhp received an upgrade to 400+ bhp with a bolt-on
Stage 2 Generation 1 Turbo Kit. Here's what they had to say:
"With 500bhp and 475 lb-ft of torque, it was like being
hit with a sledgehammer, slamming my internal organs against my
spine..... Even a moderately tuned AA Stage 1 kit made me wonder if
those factory binders were big enough: Stage 3 made me certain that
they weren't." (European Car, May 1997)
The Generation3 Stage 2
turbo kit is still a bolt on kit maintaining the civility of a daily
driven car with reliability. Refinement in maintaining precise boost
control settings, and less compressor surge are just some of the
advantages of Generation 3.
IMPORTANT!
Due to the size of the Stage 2 Intercooler, an M3 E36 front
spoiler has to be installed when installing on E36 325i.
Generation 3
vs. Generation 2 Comparison
AA Stage 2 '95 M3 E36 Turbo Kit |
| Description |
Generation 2 Stage 2 |
Generation 3 Stage 2 |
| Cost |
$7,859 |
$10,699 |
| Turbocharger |
Stage 2 |
Stage 2 |
| Wastegate |
Internal swing type unit |
HKS external wastegate with plumbing from
turbo |
| Turbo exh. downpipe |
2.5 inches |
3.0 inches |
| Intercooler |
Stage 2 |
Stage 2 |
| Piping |
Steel mandrel bends - powder coated |
Aluminum mandrel bends - polished |
| Intake pipe diameter |
2.5 inches |
3.0 inches |
| Intake Elbow |
steel pipe tubing |
CNC aluminum fitting |
| By-pass valve |
Bosch by-pass valve |
HKS blow-off valve (larger) |
| Fuel injector |
Bosch larger than stock |
Bosch (larger than Gen2) |
| Air mass meter |
Factory 3.0" diameter |
AA Tuning/Bosch 3.5" |
| Software upgrade |
AA Tuning/Bosch |
A Tuning/Bosch |
Lowering compression
kit with head bolts |
AA Tuning |
AA Tuning |
With the AA Turbo System
installed, appearance of a turbo is basically undetected. Only the
repositioning of the air intake and a front mounted intercooler is
evident. You maintain that factory like appearance.
Highlights:
Specially prepared turbocharger with external wastegate
Low restriction air filtration system
custom front mounted intercooler
Custom cast niresist exhaust manifold
Custom software programming with larger injectors
Polished aluminum mandrel bent tubing
Silicone hoses with stainless hoseclamps
Large 3" intake with CNC elbow
Large HKS Blow-off valve
Larger Air Mass Meter
Lowering compression kit with head bolts
Turbo system in kit form
Instruction manual
Price:
Generation 2 Stage 2 $7,859
Generation 3 Stage 2 $10,699
Call to Order: (603) 378-0090 |
