IPP/WebCam - Stage 1, 2, 3 &
Turbo Cams & Beehive Springs
Chevy Cavalier 2.2, Pontiac Sunfire, Chevy S10 (94-02 VIN 4)
IPP w/an exclusive distributorship with Web-Cam (a
premier cam MFG in the US), has designed a line of
cams for the Chevy Cavalier.
These are new
cams with no cam cores required!
All cams have been designed for above stock performance,
&
do not
require spring replacement. These cams increase performance and
are for street on gas & Turbos.
These are brand new cams (vs. some competitors who sell
non-reground used cams), with the correct stock base circle.
You won't have to use shims, expensive buckets or lash caps!
(Note: The
figures below may vary slightly as cams have not been degreed in actual
motors at this time.)
CUSTOM GRIND: We will custom grind these cams to your specifications. Add
only $20 to prices below.
Special Order only. Please call to order if you would like a Custom
Grind. 603.378.0090
(*Warrantee: camshafts are
warranted for 6 months with the use of our springs below)
Some Important
Info on Cam Hardening!
Cavalier camshafts have a very
thin hardening from the factory. When you get a cam reground,
unless you pay for additional hardening (which runs about an
extra $100), you have taken all the hardening out of the cam,
and it will not last long. Please understand that is why we
offer NEW cams that are hardened!
** All Our Cavalier Parts Pages
(including this one), have been MOVED to our new site!
www.ChevyCavalierWorld.com
CLICK HERE to go there NOW!!! |
|
