Unorthodox Racing
Tuner Series
Cam Gears |
|
Unorthodox Racing - Tuner Series
CAM GEARS
Application: Acura/Honda
- Lightweight 6061-T6 Billet Aluminum
- CNC Machined to .001"
- Adjustable +/- 10
- Accurate to within 1 minute of a degree
- Easy to read timing marks
- 4-Bolt pattern for a lifetime of worry free
adjustment
- Floating washers prevent bolt damage in adj.
slots
- HP / torque gains on stock or aftermarket cams
- Hard-coat anodized belt cog
- Gear tooth identical to OEM spec
- High quality natural aluminum finish
Each gear is adjustable +/- 10� (advance/retard)
and accurate to within 1 minute of a degree (60 minutes in a degree)!
Because of their design, Tuner Series gears are lighter than the
original OEM gear.
The outer cog on our gears is hard-anodized, preventing wear from the
timing belt. They also utilize a 4-bolt locking pattern with stainless
steel hardware. This design not only provides a stronger clamp load on
the sprocket once set, it also provides a lifetime of worry-free
adjustment.
Another important point, at this price conscious level, is that
tolerances on these parts are held to .001�. This is especially
important between the center and outer cog. Achieving .001" tolerances
here is something never before seen in this price range. Tooth
profiles are extremely important when machining a gear. Long term
reliability of the cog and belt are directly related to the machining
of the tooth profile. Our tooth profile matches exactly with the OEM
specifications for each gear we make.
Horsepower gains can vary widely depending on what has been done to
the vehicle. Gains from 5 to 20 horsepower can be realized. In our
instructions we have recommended settings for your specific vehicle.
For best results on highly modified vehicles we recommend a trip down
to your local dyno shop. |
