Unorthodox Racing
Cam Gears
Horsepower gains can vary widely depending on what has been
done to the vehicle. Gains from 5 to 20 horsepower can be
realized. In our instructions we have recommended settings for
your specific vehicle. For best results on highly modified
vehicles we recommend a trip down to your local dyno shop. Our
Ultra Series gears are available for SOHC and DOHC engines. Most
gears are available in natural polished aluminum as well as black,
red, and blue anodizing. |
|
Unorthodox Racing - Cam Gears
Application: Eagle
- Lightweight 6061-T6 Billet Aluminum
- CNC Machined
- Adjustable =/- 10
- Accurate to within 1 minute of a degree
- Easy to read timing marks
- 5-Bolt pattern for a lifetime of worry free
adjustment
- Floating washers prevent bolt damage in adj.
slots
- Lightening holes reduce weight further
- HP / Torque gains on stock or aftermarket cams
- Hard-coat anodized belt cog
- Gear tooth profile identical to OEm spec
- High quality polished and anodize finishes
Unorthodox Racing Ultra Series adjustable cam
gears are the pinnacle of adjustable cam gear technology. No flashy
designs here... just pure reliable performance! These gears set a new
standard for craftsmanship and reliability. Each gear is CNC-machined
from lightweight 6061-T6 aluminum billet and is adjustable +/- 10�
(advance/retard). These gears, as with all our gears, are accurate to
within 1 minute of a degree (60 minutes in a degree)! Other
aftermarket cam gears can be off by as much as 1 or 2 degrees!
Contouring is extensively used to minimize material weight. In
addition we utilize circular lightening holes as opposed to slotted or
oddly shaped holes. Circular holes provide material strength while
achieving the desired weight reduction. Ultra Series gears are lighter
than the OEM pieces, even lighter than our Tuner Series gears!
Machining tolerances are held to within .001�. The outer cog on our
gears is hard-anodized, preventing wear from the timing belt. They
also utilize a 5-bolt locking pattern with stainless steel hardware.
Combine this with exceptional tolerances between the center and the
outer cog and you have a gear that will provide a lifetime of
worry-free adjustment and reliability.
Tooth profiles are extremely important when machining a gear. Long
term reliability of the cog and belt are directly related to the
machining of the tooth profile. Our tooth profile matches exactly with
the OEM specifications for each gear we make.
Understanding the 9 digit Part # A B C
D E F G H I
A
B Series (05 = Ultra Series)
C D Vehicle Make
E Internal Use (0 = Assembly, 1 = Non-Assembly)
F G Vehicle Model
H (Nothing - place holder only)
I Color (Polished) |
