IPP Home Page
Home l Hot Products l Machining l Newsletter l Contact Us
 

  Supertech - High Performance Pistons w/Rings
Includes Pins & Wire Locks
Nissan


More than 40 years of experience in the design of racing pistons and the utilization of the latest CAD software & Finite Element Analysis (FAE) enables us to design strong high performance and yet light pistons for each application.

Compression ratio was computed with .030" head gasket and .010" deck.
A phosphate dry lubricant coating is applied to most of the pistons to protect against ring micro welding and enhance skirt lubrication.

Our pistons are manufactured from extruded high silicon, enhanced 4032 alloy (with additional Cu, Ni & Mg) that has low thermal expansion, excellent wear resistance and higher thermal conductivity.

The pistons are submitted to several machining steps in specially designed machines and in conventional CNC machines with special diamond tools for dimensional precision, perpendicularity and flatness of the ring grooves.

Features:
  • Forged from enhanced 4032 alloy and CNC machined
  • Contact reduction grooves are standard.
  • Honed & reamed pin bores for precise fit.
  • High tensile strength and evenly distributed hardness.
  • Pins and wire locks are provided with the pistons.
  • Withstand up to 42psi of turbo boost, w/alcohol, w/o any problems
  • A 2 or 3 forging steps process yields a fine structural grain oriented in fibers in the same direction of the stresses.
  • Wrist pins are constructed of cold extruded chrome moly steel for high strength to be used with wire clip locks
  • Quality Control: is performed after every step of the manufacturing process in climate controlled environments to ensure reliability of dimensions
Rings w/purchase of Pistons: (rings must be purchased separately)
4 Cyl. Set $79
Qty:
6 Cyl. Set $99
Qty:
Rings purchased alone:
4 Cyl. Set $109
Qty:
6 Cyl. Set $129
Qty:

Bore Over
Size
Comp. Ratio Dome /Dish
Vol.
Head CC's Comp
Height
Stroke Rod Lngth Pin
Diam
Wght gram Note Part # Price
/Set
Buy
Now
Nissan 240 SX 1995-98 / KA24DE
89.00mm Std 10.5:1 -11cc 46cc 1.339" (34mm) 3.780" 6.496" 21mm (0.827") 395 A/N/T P4-N8900-N11 $399
Qty:
89.50 mm 0.5mm + 8.4:1 -29cc 46cc 1.339" (34mm) 3.780 6.496 21 mm (0.827") 395 T/N P4-N895-N29 $399
Qty:
89.50mm 0.5mm+ 8.6:1 -27cc 46cc 1.339" (34mm) 3.780 6.496 21 mm (0.827") CALL T/N P4-N895-N27 $399
Qty:
89.50 mm 0.5mm + 9.0:1 -23cc 46cc 1.339" (34mm) 3.780" 6.496" 21 mm (0.827") 389 T/N P4-N895-N23 $399
Qty:
89.50 mm 0.5mm + 10.5:1 -11cc 46cc 1.339" (34mm) 3.780" 6.496" 21 mm (0.827") 389 A/N/T P4-N895-N11 $399
Qty:
Nissan SR20DET
86.50mm 0.5mm+ 9:01 -10 46 1.25"(32mm) 3.386" 5.366 22mm (.866") 303 T/N P4-NSR20/86.5CR9 $399
Qty:
87.00mm 1.0mm+ 9:01 -10 46 1.25"(32mm) 3.386" 5.366 22mm (.866") 306 T/N P4-NSR20/87CR9 $399
Qty:
87.50mm 1.5mm+ 9:01 -10 46 1.25"(32mm) 3.386" 5.366 22mm (.866") 307 T/N P4-NSR20/87.5CR9 $399
Qty:
Nissan 350Z VQ35 (gasket & dech height 0.082)
95.50mm Std 8.7:1 -10 57 1.168"(29.6mm) 3.205" 5.669" 22mm (.866") 370 T/N P6-N35-955-N10 $645
Qty:
96.00mm 0.5mm+ 8.8:1 -10 57 1.168"(29.6mm) 3.205" 5.669" 22mm (.866") 370 T/N P6-N35-96-N10 $645
Qty:
Nissan RB25 2.5 Lts
86.50mm 0.5mm+ 9:1 -15.5cc 64 1.24"(31.5mm) 2.822" 5.669" 21mm (.827") 349 T/N P6-RB25/86.5-CR9 $645
Qty:
Nissan RB26 2.6 Lts
86.5mm 0.5mm+ 8.5:1 -15.5cc 70 1.181" (30mm) 2.901" 4.783" 21mm (.827") 347 T/N P6-RB26/86.5-CR8.5 $645
Qty:
Nissan RB20 2.0 Lts (6 cyl)
78.5mm 0.5mm+ 8.5:1 -1.3cc n/a 1.260" (32mm) 2.744" 4.783" 21mm (.827") N/A T/N P6-RB20/78.5-CR8.5 $645
Qty:
Nissan CA18DET
83.50mm 0.5mm+ 8.5:1 FT (-0.9) 53 1.181"(30mm) 3.291" 5.236" 20mm (.787") 292 T/N P4-NCA18-835-CR8.5 $399
Qty:
84.00mm 1 mm+ 8.5:1 FT (-0.9) 53 1.181"(30mm) 3.291" 5.236" 20mm (.787") 296 T/N P4-NCA18-84-CR8.5 $399
Qty:
NOTES:
T (Turbo)
N (Nitrous)
A (Naturally Aspirated)
 
 
 
 
 
 
 

Sales/Tech Line: (603) 378-0090
Email: info@ImportPerformanceParts.net


Thank You for visiting IPP - ImportPerformanceParts.net
*All prices on this site are subject to change without notice. Import Performance Parts™ disclaims responsibility for any printing or typographical errors, and does not guarantee that all information is accurate.


home |  FAQ |  contact us |  can't find a part? |  hot products |  links |  site map

Visit www.Tuner-World.com
Our HOT Import Enthusiast Site