 |
|
Carrillo Pro H-Beam Rods
MG/MGB
"Our connecting rods are fully machined to guarantee the
removal of all surface imperfections in the forging. After heat
treatment, each connecting rod is 100% magnaflux inspected and
hardness checked, then machined to final size. Each set of rods is
balanced and then shot peened to achieve the ultimate in strength and
fatigue properties.
One of the most susceptible points of failure in conventionally
designed connecting rods is the fastener system. At Carrillo, we have
exerted a great deal of effort into developing rod bolts for specific
applications. This effort has led to the utilization of four different
bolt designs. The largest bolt available is a 7/16 inch diameter
thread, fabricated either from AISI H11 tool steel or Multiphase®
material. Many questions are directed to us regarding proper bolt
selection. Briefly, the H11 bolt (WMC7 and WMC6) is a high quality,
aircraft standard fastener, applicable to most high performance uses.
Under racing conditions, we suggest that the H11 bolts be changed
periodically. In comparison, the Multiphase® bolt (SPS-CARR) is
designed to be a non-replacement type fastener."
Part # Key Code:
S = Car Bolt
H = Std. Bolt |
|
